A call button with an integrated 6.35mm jack socket, for connecting a pear push or similar assistive switch to the DTAKIT range.
The DTACBJ combines a call button with a 6.35mm jack socket, allowing a pear push or similar assistive switch to be connected directly to the call point for users who find a standard button or pull cord difficult to operate.
It fits a standard 25mm deep single gang flush back box, or a round-cornered surface box where flush mounting isn’t possible.
Compatible systems
Works with DTA4 / DTA4S control panels, and connects to OmniCALL, OmniCare or CARE2 Emergency Voice Communication (EVC) systems as part of a DTAKIT or DTASKIT installation.
Note: adding call points beyond the standard three-part kit may affect BS 8300-2:2018 compliance, refer to the standard.
| Specification | Value |
|---|---|
| Alarm type | 90dB @ 30cm |
| Back box | 25mm deep single gang flush back box, or round-cornered surface box |
| Connection | 6.35mm jack socket for pear push or similar assistive switch |
| Variant | Dimensions (H x W x D) | Material |
|---|---|---|
| DTACBJ | 85 x 85 x 13 mm | White plastic |
| DTASCBJ | 85 x 85 x 14 mm | Stainless steel grade 304 |
