3-Part Emergency Assistance/Toilet Alarm Kit

A complete three-part disabled toilet alarm kit for OmniCALL, OmniCare and CARE2 Emergency Voice Communication (EVC) systems, fully compliant with BS 8300-2:2018. Also compatible with the DTA4 four-way control panel.

SKU: DTAKIT Category: Manufacturer:

Key Benefits

Key Benefits

  • Works with OmniCALL, OmniCare, CARE2 or a standalone DTA4 control panel, no need to commit to one system
  • Up to two kits per EVC connection point
  • Call acknowledge: audible and visual reassurance to caller
  • Automatic self-test facility
  • Mix and match white and stainless steel components if required
  • Expandable with additional call, reset and combination points

Details

Description

The DTAKIT is a complete emergency assistance/toilet alarm kit for use with OmniCALL, OmniCare, CARE2 EVC systems and DTA4 control panel. Fully compliant with BS 8300-2:2018, the kit contains everything needed to create a compliant toilet alarm zone.

Note: Stainless steel products are not intended for installation in humid areas. For shower rooms and wet areas, use the IP65 rated products.

What’s in the kit

  • Ceiling-mounted pull cord with two fully compliant G-shape pull rings (DTACP / DTASCP)
  • Over-door triangular lens light and sounder (DTAODL / DTASODL)
  • Local reset point with LED and sounder (DTARP / DTASRP)
  • Self-adhesive vinyl disabled WC door sign, blue (DTALAB)
  • Euan’s Guide card

Connect it via an OmniCALL outstation or OCACIF, a BVOCRIF repeater for OmniCare, directly to a CARE2 console, or into a DTA4 four-way control panel with no EVC required. Connect up to two DTAKIT kits to a single point on the EVC panel. The EVC system monitors and battery-backs the alarm, with automatic self-test to keep all sounders and LEDs operational.

Optional ancillary components

Add additional call and reset points to extend the system (note: adding extra components may affect BS 8300-2:2018 compliance, refer to the standard):

  • DTACB / DTASCB: Additional call button
  • DTACBRP / DTASCBRP: Combined call & reset point
  • DTACPW / DTASCPW: Red wall-mounted pull cord (for where a ceiling pull is impractical)
  • DTACBJ / DTASCBJ: Call button with 6.35mm jack socket (for pear push lead connection)

IP65 rated options (for wet rooms and shower areas):

  • DTACPM: IP65 ceiling pull cord (grey)
  • DTACBM: IP65 call button (grey)
  • DTARPM: IP65 reset point (grey)
  • DTACBRPM: IP65 combined call & reset point (grey)

Technical Data

Technical Data

Specification Value
Alarm type 90dB @ 30cm
Note Stainless steel products not for installation in humid areas
Component Description Dimensions (H x W x D) Material IP rating Back box
DTACP Ceiling-Mounted Pull Cord 30 x 80 mm diameter White plastic Supplied with its own surface mount enclosure
DTASCP Ceiling-Mounted Pull Cord 85 x 85 x 14 mm Stainless steel grade 304 Supplied with its own surface mount enclosure
DTACPM Ceiling-Mounted Pull Cord (IP65) 80 x 80 x 60 mm RAL 7035 IP65 rated, 16mm cable gland supplied Supplied with its own surface mount enclosure
DTAODL Overdoor Light & Sounder 85 x 85 x 58 mm White plastic 25mm deep single gang flush back box, or round-cornered surface box
DTASODL Overdoor Light & Sounder 85 x 85 x 60 mm Stainless steel grade 304 25mm deep single gang flush back box, or round-cornered surface box
DTARP Reset Point 85 x 85 x 13 mm White plastic 25mm deep single gang flush back box, or round-cornered surface box
DTASRP Reset Point 85 x 85 x 14 mm Stainless steel grade 304 25mm deep single gang flush back box, or round-cornered surface box
DTARPM Reset Point (IP65) 80 x 80 x 60 mm RAL 7035 IP65 rated, 16mm cable gland supplied 25mm deep single gang flush back box, or round-cornered surface box
DTALAB WC Door Sign 108 x 108 mm Blue, self-adhesive vinyl Self-adhesive, fits directly to the WC door
DTACB Call Point (Button) 85 x 85 x 13 mm White plastic 25mm deep single gang flush back box, or round-cornered surface box
DTASCB Call Point (Button) 85 x 85 x 14 mm Stainless steel grade 304 25mm deep single gang flush back box, or round-cornered surface box
DTACBM Call Point (Button, IP65) 80 x 80 x 60 mm RAL 7035 IP65 rated, 16mm cable gland supplied 25mm deep single gang flush back box, or round-cornered surface box
DTACBRP Combined Call & Reset Point 85 x 85 x 13 mm White plastic 25mm deep single gang flush back box, or round-cornered surface box
DTASCBRP Combined Call & Reset Point 85 x 85 x 14 mm Stainless steel grade 304 25mm deep single gang flush back box, or round-cornered surface box
DTACBRPM Combined Call & Reset Point (IP65) 80 x 80 x 60 mm RAL 7035 IP65 rated, 16mm cable gland supplied 25mm deep single gang flush back box, or round-cornered surface box
DTACPW Wall-Mounted Pull Cord 85 x 85 x 13 mm White plastic 25mm deep single gang flush back box, or round-cornered surface box
DTASCPW Wall-Mounted Pull Cord 85 x 85 x 14 mm Stainless steel grade 304 25mm deep single gang flush back box, or round-cornered surface box
DTACBJ Call Point (Button & Jack Socket) 85 x 85 x 13 mm White plastic 25mm deep single gang flush back box, or round-cornered surface box
DTASCBJ Call Point (Button & Jack Socket) 85 x 85 x 14 mm Stainless steel grade 304 25mm deep single gang flush back box, or round-cornered surface box

 

Cable requirements (identical for OmniCALL, OmniCare, OmniCare PLUS and CARE2):

Connection Requirement
Connection to over-door light (DTAODL) 2 core 1.5mm screened, or 2 core 1.5mm screened Fire Rated e.g. FP200
Connects from OmniCALL outstation or OCACIF / OmniCare or OmniCare PLUS BVOCRIF repeater / CARE2 console (direct)
Internal wiring (DTAODL > DTARP > DTACP) 2 core security cable, single connection per span
Max distance, single DTAKIT 500m (or 40R max total line resistance)
Max distance, dual DTAKIT (two kits per connection) 250m (or 20R max total line resistance)