DTAKIT Emergency Assistance Alarm

Emergency Assistance Alarm Kit for OmniCare, OmniCarePLUS, CARE2 or our 4-way control panel

The 3-part alarm kit provides a complete solution for Emergency Assistance Alarm facilities when added to any of our Emergency Voice Communication (EVC) systems or to our 4-way Assistance Alarm Control Panel.

The ‘three-part’ kit comprises of a Pull Cord, Reset Point, and Overdoor Light/Sounder. In addition, the kit includes a blue vinyl self-adhesive WC sign and a Euan’s Guide card (for fitting to the cord to help prevent it from being tied up or generally made inaccessible).

Indication (visual & audible) of an incoming call for assistance is at the connected Control Panel – OmniCare, OmniCarePLUS, CARE2 or 4-way Assistance Alarm Panel. The Call is ‘accepted’ at the Control Panel and ‘reassures’ the caller that help is on the way (both visually and audibly).

The DTAKIT is available in either a white or stainless steel finish, with each part of the kit available to order separately. This adds further flexibility by providing the ability to mix & match finishes – including our waterproof IP65 products.

Adding Emergency Assistance Alarms to an EVC system provides the ability to monitor activity on these points and two-way communication with the standard outstations on an EVC system.

 

Features:
  • White or stainless steel finish
  • Call acknowledge feature
  • Powered from the line – no local power required
  • Power backup via the Control Panel batteries
  • Monitored at the Control Panel – with fault indication
  • Comes as a complete kit or parts can be ordered separately if a combination of finishes is required
  • Fully compatible with our IP65 Assistance Alarm products
  • Additional Call, Reset, or Call & Reset, points can be added (may result in non-compliance to BS58300-2:2018)

Pull Switch
Ceiling mounted pull with two ‘G’ pulls

Reset Point
Reset button (and LED) to reset calls locally

Light/Sounder
Overdoor triangular lens with integral sounder to attract attention

WC Sign
Self-adhesive, vinyl, disabled toilet sign

Euan’s Guide
A card to be fixed to the red pull cord to advise on the importance of allowing the cord to hang freely

  • The ‘three-part’ Emergency Assistance Alarm Kits are connected to the system via a repeater/interface unit (BVOCRIF)
  • Up to two Kits can be connected to one line (will show as one point on the control panel)
  • As an alternative, one Kit and an additional ceiling pull can be fitted to one line
  • It is possible to add other optional products to the Kit*

*Adding additional points to the standard DTAKIT may result in non-compliance with BS8300. Dependent upon the system layout, some components may be unmonitored

  • The Kits are connected directly to the control console
  • Up to two Kits can be connected to one line (will show as one point on the control panel)
  • As an alternative, one Kit and an additional ceiling pull can be fitted to one line
  • It is possible to add other optional products to the Kit*

*Adding additional points to the standard DTAKIT may result in non-compliance with BS8300. Dependent upon the system layout, some components may be unmonitored

  • The Kits are connected directly to the Panel
  • One Kit per line, i.e. up to four kits on the DTA4

DTAKIT
Complete ‘3-part’ Kit
White
Includes: DTACP, DTAODL, DTARP, DTALAB & Euan’s Guide
0.34 kg

DTASKIT
Complete ‘3-part’ Kit
Stainless steel
Includes: DTASCP, DTASODL, DTASRP, DTALAB & Euan’s Guide
0.48 kg

Mix & Match Options
Purchase items individually to suit requirements
Each operational ‘kit’ requires:

  • Call point
  • Reset point
  • Overdoor light

DTACP / DTASCP / DTACPM
Call Point – Ceiling Mounted Pull Cord
White / stainless steel / grey IP65 rated
30mm x 80mm(diam.) / 85mm x 85mm x 14mm / 80mm x 80mm x 60mm

DTACB / DTASCB / DTACBM
Call Point – Button
White / stainless steel / grey IP65 rated
85mm x 85mm x 13mm / 85mm x 85mm x 14mm / 80mm x 80mm x 60mm

DTACPW / DTASCPW
Call Point – Wall Mounted Pull Cord
White / stainless steel
85mm x 85mm x 13mm / 85mm x 85mm x 14mm

DTACBJ / DTASCBJ
Call Point – Button & 6.35mm Jack Socket
White / stainless steel
85mm x 85mm x 13mm / 85mm x 85mm x 14mm

DTARP / DTASRP / DTARPM
Reset Point
White / stainless steel / grey IP65 rated
85mm x 85mm x 13mm / 85mm x 85mm x 14mm / 80mm x 80mm x 60mm

DTACBRP / DTASCBRP / DTACBRPM
Call Button & Reset Point in one
White / stainless steel / grey IP65 rated
85mm x 85mm x 13mm / 85mm x 85mm x 14mm / 80mm x 80mm x 60mm

DTAODL / DTASODL 
Overdoor Light/Sounder
White / stainless steel
85mm x 85mm x 58mm / 85mm x 85mm x 60mm

DTALAB
WC Sign
Blue vinyl
110mm x 110mm

BVOCRIF
Repeater/Interface
Required for connection to OmniCare 
0.76 kg

Key Benefits

Safe & Compliant

British Standards BS8300-2 Code of Practice

BS8300-2 is a BSI Standards Publication code of practice providing guidance on inclusive and accessible design of buildings and the spaces within them to ensure an accessible and inclusive environment.

Documentation & Downloads

Looking for something in particular?

Search our full database of downloads and documentation

Emergency Assistance Alarm Control

Loop Wired EVC

OmniCare Toilet Alarm Control

Emergency Assistance/Toilet Alarm Kit(s) connect to an OmniCare EVC system via an interface. Ability to include Disabled Refuge, Fire Telephone, Steward Telephone & Emergency Assistance/Toilet Alarm facilities on one panel.

RADIAL WIRED EVC

CARE2 Toilet Alarm Control

Emergency Assistance/Toilet Alarm Kit(s) connect to a CARE2 EVC system panel. Ability to include Disabled Refuge, Fire Telephone, Roaming Telephone, Steward Telephone & Emergency Assistance/Toilet Alarm facilities on one panel.

Emergency Assistance

4-Way Toilet Alarm Control Panel

Emergency Assistance Alarm Control Panel with the ability to connect to up to 4 of our emergency assistance toilet alarm kits. Robust, easy-to-install, easy-to-use, stand-alone, disabled toilet alarm solution.

Emergency Assistance Kit Options

Emergency Assistance

Emergency Assistance Alarm kit for our DTA4 control panel and OmniCare & CARE2 EVC systems. Available in white or brushed stainless steel finishes. 3-part kit with adhesive WC sign.

Emergency Assistance

Single-way, stand-alone toilet alarm kit. Available in white or brushed stainless steel. The 4-part kit includes control panel, over-door light, pull cord, reset switch and adhesive WC sign.

Make An Enquiry

Make An Enquiry (#13)

Scroll to Top