Emergency Assistance & Toilet Alarm Systems

Emergency assistance alarms and toilet alarm kits for accessible washrooms, changing facilities and bedrooms. Choose a self-contained mains-powered kit, a dedicated DTA4 four-way control panel, or a kit that connects to our OmniCALL, OmniCare or CARE2 Emergency Voice Communication (EVC) systems.

Category: Disabled Toilet Alarm Systems  Manufacturer: Baldwin Boxall

Alarm indication and call acknowledgement

Pull-cord and call-button activation triggers audible and visual alarm indications. Depending on the configuration, the system alerts staff locally or at a designated control point.

Compatible systems also provide call acknowledgement. When staff accept a call at the control panel, an acknowledgement tone sounds at the alarm kit to reassure the caller that someone has accepted their request for assistance.

Three alarm control options

BS 8300-2:2018 Compliant

Our kits are compliant with BS 8300-2:2018, the code of practice covering accessible and inclusive design in buildings other than dwellings.

Supporting safer toilets with
Euan's Guide

Euan’s Guide is a disabled access charity that helps disabled people find and share information about accessible places. Its Safer Toilets campaign tackles a practical problem: emergency pull cords that people tie up, cut short or tuck out of reach.

Finishes and component options

The range gives specifiers a broad choice of finishes and components for accessible washrooms, changing facilities and wet rooms.

Technical Data

Kit Options

Control Options

Compliance

Kits

Videos

Supporting your EVCS specification

EVC requirements rarely come down to one standard or one product choice. Learn more on the full OmniCALL EVC range and how Baldwin Boxall can support your project.

Documentation & Downloads

Looking for something in particular?

Search our full database of downloads and documentation

Simple to install. Built for real buildings. Ready for the new standard.

OmniCALL* is shaped by the realities of modern construction and refurbishment. It keeps installation time low, works with challenging layouts and supports projects where downtime needs to stay minimal. The system is designed and manufactured in Britain and backed by long-term technical support.

*Protected by UK Patent GB2605125. Additional patents pending EP4302472.

Why choose OmniCALL?

Built for BS8893 and beyond

OmniCALL is designed for the latest EVC standards, including BS5839-9 and BS8300, and is ready for BS8893 compliance. It supports both current requirements and the expectations of future guidance.

Faster installation with 2-core wiring

The use of 2-core fire rated cabling reduces copper, lowers installation cost and makes routing easier on site. It is well suited to busy buildings and retrofit projects where access is limited.

Non polarity dependent connections

Terminations are non-polarity dependent. That cuts down on wiring errors, protects against accidental damage and keeps commissioning time on schedule.

Loop and radial in one system

OmniCALL supports both loops and radials on the same Master Station. This helps with awkward floorplates, phased work and partial system upgrades, without forcing a full rewire.

Clearest audio

OmniCALL provides clear, effective communication using full duplex Type A audio and speech steered Type B outstations. The system is designed so users can hear and be heard even in noisy or challenging conditions.

Speak with an EVC system expert today.

Frequently Asked Questions

What are the benefits of having one system for loop and radial?

OmniCALL allows loop and radial outstations on the same Master Station. This simplifies design, gives more flexibility on site and makes it easier to extend or part-upgrade systems without starting again.

No. There is no fixed distance limit between remote units, they can be placed anywhere on the loop. Total loop distance depends on the number of outstations, up to a maximum of 1.5 kilometres per loop.

A single loop can support up to 32 outstations plus 32 assistance alarm kits. An OCCPL Master Station supports up to 128 outstations and 128 assistance alarms across four loops or radials. The OCCPS variant supports up to 32 outstations and 32 assistance alarms across four loops or radials. Networked systems can reach 512 outstations (and more where required) and 512 assistance alarms.

Traditional loop systems often use 4-core cable. OmniCALL uses 2-core fire rated cable for loops and radials. This halves copper use, cuts cable cost, reduces terminations and lowers the chance of polarity mistakes. It can also make it easier to reuse existing cabling when replacing earlier Baldwin Boxall ranges or existing two core loop and radial systems.

No, the OmniCALL master station and network expansion panels have been designed to have batteries for 24 hours quiescent (plus 3 hours operation) within the enclosures. Please speak to our team if you require longer battery back up.

Both the OCCPS and OCCPL master stations are fitted with one line card which provides either one loop connection or four radials. Optional line cards are supplied with each providing either one loop or four radial connections. Each master station can be fitted with three additional line cards.