VIGIL3 Critical Line Monitoring
Critical signal paths of Voice Alarm systems must be fully monitored with faults detected, reported and quickly acted upon.
All critical signal paths of a Voice Alarm/VACIE system must be fully monitored and any detected faults reported clearly and at relevant points on the system.
Automatic monitoring is carried out, unobtrusively, from the Fire Officer’s microphone, through the amplifiers, to the end of the loudspeaker lines. Power supplies, internal battery charger and backup batteries are also included in the monitoring processes.
It is vital that any faults detected with a Voice Alarm system are reported and acted upon.
Our VIGIL3 voice alarm system – including our range of monitoring products – are fully tested and certified to BS EN 54. Voice Alarm monitoring products are included in this testing process which is carried out by a recognised, third party testing house.
BEL1
End of Line monitor
Installed on each loudspeaker circuit
140mm x 80mm x 40mm
BEL1IP
End of Line monitor
Weatherproof version of the BEL1
160mm x 100mm x 82mm
BVRDACO / BVRDNCO
Amplifier/Line monitor
DIN rail mounted
With / without Automatic amplifier changeover
BVRDADC
DC Line monitor
DIN rail mounted
BV3ADIM / BV3ADIS
DC Line monitor/isolatorÂ
DIN rail mounted
Master / slave
BVLAM
Impedance monitor
DIN rail mounted
Not suitable for UK
Safe & Compliant
BS EN 54: Fire Detection & Fire Alarm Systems, is a mandatory standard that specifies requirements and laboratory testing for every component of fire detection and fire alarm system.
UKCA (UK Conformity Assessed) marking on products replaces CE marking in the UK and requires that certification of construction products, such as VACIE / Voice Alarm Control & Indicating Equipment is performed by a UK-based approved body.
Key Benefits
- Fully BS EN54 Tested & Certified
- Continual monitoring of voice alarm system
- Visual & audible fault indications
VIGIL3 Voice Alarm System
Documentation & Downloads
| Downloads | Link |
|---|---|
| BEL1 End-of-Line Monitoring Device – Datasheet | |
| BEL1IP End-of-Line Monitoring Device, Weatherproof – Datasheet | |
| BV075D Dual 75W Amplifier – Datasheet | |
| BV075Q Quad 75W Amplifier – Datasheet | |
| BV150D Dual 150W Amplifier – Datasheet | |
| BV150Q Quad 150W Amplifier – Datasheet | |
| BV300 Dual 300W Amplifier – Datasheet | |
| BV3ADIM/DIS DC Line Monitor – Datasheet | |
| BV3AIM2 & BV3AIM4 Audio Input Modules – Datasheet | |
| BV3AOM8 Audio Output Module – Datasheet | |
| BV3MF VIGIL3 Amplifier Mainframe – Datasheet | |
| BVMBC Battery Charger Module – Datasheet | |
| BVRDACO VIGIL3 Amplifier/Line Monitor Module – Datasheet | |
| BVRDCIMON Fire Panel Monitor Module – Datasheet | |
| Eclipse5 VIGIL3 Stand Alone PAVA System – Datasheet | |
| Networking Products for VIGIL3 Voice Alarm – Datasheet | |
| VIGIL3 System Overview – Datasheet | |
| VIGIL3 Voice Alarm Amplifier Options – Datasheet | |
| Voice Alarm System Monitoring Options – Datasheet |
| Downloads | Link |
|---|---|
| Eclipse5 BIM Objects | |
| Loudspeakers BIM Objects | |
| Microphone BIM Objects | |
| VIGIL3 BIM Objects |
| Downloads | Link |
|---|---|
| Cable Types & Requirements for our Systems & Products – Guide |
| Downloads | Link |
|---|---|
| About the Architecture & Configuration of VIGIL3 Voice Alarm – Manual | |
| BEL10 10x BEL1 on One PCB – Manual | |
| BEL1IP End-of-Line Monitoring Device – Manual | |
| BV3ADIM/DIS DC Line Monitor – Manual | |
| BVLAM Impedance Monitor – Manual | |
| BVMBC Battery Charger Module – Manual | |
| BVRDADC DC Line Monitor – Manual | |
| Eclipse5 VIGIL3 Stand Alone PAVA System – Manual | |
| VIGIL3 Voice Alarm Amplifiers – Manual |
| Downloads | Link |
|---|---|
| VIGIL3 Commissionator |
Looking for something in particular?
Search our full database of downloads and documentation
VIGIL3 Product Range
VIGIL3 Amplifiers
Transformerless amplifiers, modular, energy-efficient and powerful. Range includes dual & quad amplifier options.
VIGIL3 Battery Charger
Compact module continually monitors system backup batteries & charges them whenever necessary.
VIGIL3 Audio Output Module
With VIGIL3 there is no need for the conventional ‘router-style’ control. Supports up to 8 audio outputs – network up to 100 units.
Powerful stand-alone, wall-mounted PAVA system. Ideal for fitting into building risers or places where space is limited.
VIGIL3 Audio Input Module
6-band parametric EQ and programmable priority for each input. Configure every input from a single point on the VIGIL3 network.
VIGIL3 Line Monitoring
All critical signal paths of a voice alarm system must be fully monitored & faults automatically indicated on key parts of the system.
Loudspeakers
Powerful high-clarity loudspeakers for public address and voice alarm systems for both indoor and outdoor installations.
Microphones for Voice Alarm (VA) & Public Address (PA)
User-configurable, large format touchscreen Graphical User Interface (GUI) enables graphical control of our VIGIL3 and Eclipse5 systems. Upload logos, background images, edit buttons and much more.
Easy-to-use microphone with a touch sensitive screen for full control of a VIGIL3, VIGIL2, Eclipse4 or Eclipse5 system. Multi-function: NFC log in, select & route background music, emergency control mode and more.Â
Baldwin Boxall Emergency Fire Microphones are housed in a robust, lockable steel enclosure and include a rugged, fist-held microphone console. Wall mountable and rack mounting units available.
BDM400 range of intelligent PA microphones with a variety of features to suit all installations. Suitable for connection to any of our voice alarm or public address systems – including VIGIL3 & Eclipse5.
Ambient Noise Sensors (ANS) continually monitor the noise level (in a zone/area) and automatically adjust the volume of system broadcasts to that area – thus ensuring audibility at all times. Connect as part of any of our voice alarm systems.
Control Panels enable local control of audio facilities such as volume adjustment, music source selection and microphone input.