VIGIL3 Critical Line Monitoring

Critical signal paths of Voice Alarm systems must be fully monitored with faults detected, reported and quickly acted upon.

All critical signal paths of a Voice Alarm/VACIE system must be fully monitored and any detected faults reported clearly and at relevant points on the system.

Automatic monitoring is carried out, unobtrusively, from the Fire Officer’s microphone, through the amplifiers, to the end of the loudspeaker lines. Power supplies, internal battery charger and backup batteries are also included in the monitoring processes.

It is vital that any faults detected with a Voice Alarm system are reported and acted upon.

 

Our VIGIL3 voice alarm system – including our range of monitoring products – are fully tested and certified to BS EN 54. Voice Alarm monitoring products are included in this testing process which is carried out by a recognised, third party testing house.

BEL1
End of Line monitor
Installed on each loudspeaker circuit
140mm x 80mm x 40mm

BEL1IP
End of Line monitor
Weatherproof version of the BEL1
160mm x 100mm x 82mm

BVRDACO / BVRDNCO
Amplifier/Line monitor
DIN rail mounted
With / without Automatic amplifier changeover

BVRDADC
DC Line monitor
DIN rail mounted

BV3ADIM / BV3ADIS
DC Line monitor/isolator 
DIN rail mounted
Master / slave

BVLAM
Impedance monitor
DIN rail mounted
Not suitable for UK

Safe & Compliant

EN54 Certified

BS EN 54: Fire Detection & Fire Alarm Systems, is a mandatory standard that specifies requirements and laboratory testing for every component of fire detection and fire alarm system.

UKCA UK Conformity Assessed

UKCA (UK Conformity Assessed) marking on products replaces CE marking in the UK and requires that certification of construction products, such as VACIE / Voice Alarm Control & Indicating Equipment is performed by a UK-based approved body.

British Standards BS5839-8 Code of Practice
BS 5839-8 is a BSI Standards Publication code of practice providing recommendations for the design, installation, commissioning, and maintenance of voice alarm systems that automatically broadcast speech or warning tones, in response to signals from their associated fire detection and fire alarm systems.

Key Benefits

VIGIL3 Voice Alarm System

Fast. Powerful. Flexible. VIGIL3 is built with a fault-tolerant ethernet backbone, no ethernet switches are required and there are no licence fees. From a single rack to large distributed systems with hundreds of outputs, use wall mount or rack mount for outputs in any combination.

Documentation & Downloads

Looking for something in particular?

Search our full database of downloads and documentation

YEAR WARRANTY 7

Added peace of mind with our 7-Year Warranty*

When it comes to the systems you rely upon to keep lives safe, complete confidence is the very least you should expect. That's why all new manufactured Baldwin Boxall products come with a manufacturer 7-year warranty as standard.
Learn More
7 Year Warranty

VIGIL3 Product Range

Voice Alarm

VIGIL3 Amplifiers

Transformerless amplifiers, modular, energy-efficient and powerful. Range includes dual & quad amplifier options.

Voice Alarm

VIGIL3 Battery Charger

Compact module continually monitors system backup batteries & charges them whenever necessary.

Voice Alarm

VIGIL3 Audio Output Module

With VIGIL3 there is no need for the conventional ‘router-style’ control. Supports up to 8 audio outputs – network up to 100 units.

Voice Alarm

Powerful stand-alone, wall-mounted PAVA system. Ideal for fitting into building risers or places where space is limited.

Voice Alarm

VIGIL3 Audio Input Module

6-band parametric EQ and programmable priority for each input. Configure every input from a single point on the VIGIL3 network.

Voice Alarm
Built on a dedicated, fault-tolerant, Ethernet backbone with a range of networking options.
Voice Alarm

VIGIL3 Line Monitoring

All critical signal paths of a voice alarm system must be fully monitored & faults automatically indicated on key parts of the system.

Audio Loudspeakers

Loudspeakers

Powerful high-clarity loudspeakers for public address and voice alarm systems for both indoor and outdoor installations.

Microphones for Voice Alarm (VA) & Public Address (PA)

Touch Control

User-configurable, large format touchscreen Graphical User Interface (GUI) enables graphical control of our VIGIL3 and Eclipse5 systems. Upload logos, background images, edit buttons and much more.

Touch Control

Easy-to-use microphone with a touch sensitive screen for full control of a VIGIL3, VIGIL2, Eclipse4 or Eclipse5 system. Multi-function: NFC log in, select & route background music, emergency control mode and more. 

Fire Microphones

Baldwin Boxall Emergency Fire Microphones are housed in a robust, lockable steel enclosure and include a rugged, fist-held microphone console. Wall mountable and rack mounting units available.

Paging Microphones

BDM400 range of intelligent PA microphones with a variety of features to suit all installations. Suitable for connection to any of our voice alarm or public address systems – including VIGIL3 & Eclipse5.

Ambient Microphones

Ambient Noise Sensors (ANS) continually monitor the noise level (in a zone/area) and automatically adjust the volume of system broadcasts to that area – thus ensuring audibility at all times. Connect as part of any of our voice alarm systems.

Room Panels

Control Panels enable local control of audio facilities such as volume adjustment, music source selection and microphone input.

Make An Enquiry

Make An Enquiry (#13)
Scroll to Top
Our Revolutionising New EVC System

OmniCALL

Streamline protocols with unmatched connectivity, versatility, and sustainability.